Set-up water bath
& heat PerioPlast
What’s in the Starter Kit
How to set-up & clean water bath
How to make PerioPlast mouldable
To turn subtitles off/on, press 'CC' in the video settings.
PART 1 / 3
Unboxing the Starter Kit
Training materials, how-to booklets.
Free sample & example stent.
2 boxes of Elemental PerioPlast
Water bath to make the material moldable
PART 2 / 3
Setting up your water bath
What's in your Water Bath kit
water bath
cup holder
steel cup (2)
forceps
Water bath set-up
Place the cup holder in the bath.
Fill the bath with water to the line on the cup holder.
Pro tip
Fill the bath with hot tap water to speed up the heating time.
Fill the cup with water to the line on the cup.
Pro tip
Fill the bath with hot tap water to speed up the heating time.
Place the cup in the cup holder.
Plug in & turn the bath on.
The bath will automatically go to 180°F / 80°C. This will take approx. 5 min.
Quick check
Both cup and bath are now filled with water.
The water bath is ready to use when the water is steaming.
Cleaning the cup & bath
Steel cup
  • Use a clean cup for every patient.
  • Cup is autoclavable at 273°F or 134 °C.
Water bath
  • Can't be autoclaved.
  • Clean with sterilization wipes at least once a day.
Cup holder
  • Clean with sterile wipes.
PART 3 / 3
Making Elemental PerioPlast mouldable
Check if there’s water in both bath & cup. Turn the bath on at 180°F or 80°C.
Wait until the water is steaming. This takes approx. 5 minutes.
Put on gloves and apply some Vaseline to prevent sticking.
Open up 1 sheet (4 cubes) of PerioPlast® and pour it in the cup.
Stir the material with the forceps for 10 seconds.
The granules will stick together. If not, the water is not hot enough.
Pull the material of the forceps.
You can always reheat to restart.
Quick check
The material sticks together & feels like soft chewing gum.
You don’t feel individual granules anymore.
2 - Set-up water bath
& heat PerioPlast
Next
3 - Making your 1st Elemental stent
Continue
Upcoming
4- Clinical & financial implementation
Support & contact
Email Sylvi at
Message us on Instagram
Text us on WhatsApp
Home
Water bath set-up & making moldable
Page 2/4
Water bath set-up & making PerioPlast® moldable
Unboxing the Starter Kit
Water bath set-up
Cleaning instructions
Making PerioPlast® moldable
Back
NEXT
Making your 1st Elemental stent
Continue
Water bath set-up
& making PerioPlast® moldable
To turn subtitles off/on, press 'CC' in the video settings.
PART 1 / 3
Unboxing the Starter Kit
Training materials, how-to booklets.
Free sample & example stent.
2 boxes of Elemental PerioPlast
Water bath to make the material moldable
PART 2 / 3
Setting up your water bath
What's in your Water Bath kit
water bath
cup holder
steel cup (2)
forceps
Water bath set-up
Place the cup holder in the bath.
Fill the bath with water to the line on the cup holder.
Pro tip
Fill the bath with hot tap water to speed up the heating time.
Fill the cup with water to the line on the cup.
Pro tip
Fill the bath with hot tap water to speed up the heating time.
Place the cup in the cup holder.
Plug in & turn the bath on.
The bath will automatically go to 180°F / 80°C. This will take approx. 5 min.
Quick check
Both cup and bath are now filled with water.
The water bath is ready to use when the water is steaming.
How to clean the cup & bath
Steel cup
  • Use a clean cup for every patient.
  • Cup is autoclavable at 273°F or 134 °C.
Water bath
  • Can't be autoclaved.
  • Clean with sterilization wipes at least once a day.
  • See water bath manual for steam sterilization protocol.
Cup holder
  • Clean with sterilization wipes at least once a day.
PART 3 / 3
Making Elemental PerioPlast® moldable
Check if there’s water in both bath & cup. Turn the bath on at 180°F or 80°C.
Wait until the water is steaming. This takes approx. 5 minutes.
Put on gloves and apply some Vaseline to prevent sticking.
Open up 1 sheet (4 cubes) of PerioPlast® and pour it in the cup.
Stir the material with the forceps for 10 seconds.
The granules will stick together. If not, the water is not hot enough.
Pull the material of the forceps.
You can always reheat to restart.
Quick check
The material sticks together & feels like soft chewing gum.
You don’t feel individual granules anymore.
Get support from an Elemental specialist
Email Sylvi at
sylvi.boer@withelemental.com
Message us on Instagram
Text us on WhatsApp